Behringer Pro Mixer VMX200
Specifications Manual Brochure Warranty Enlarged View Front View Rear View
The VMX200 perfectly embodies the VMX concept, combining no more channels than you need with an impressive set of state-of-the-art performance features and typical Behringer audio and build quality. Its 2 dual-input stereo channels allow connection of 4 stereo sources with top-panel selection. Each stereo channel features a gain control, an effective 3-band kill EQ with up to 32 dB of attenuation, and a 45mm Ultraglide fader with a 3-way curve switch. In addition, the VMX200 sports a dedicated mic channel with a ULN input stage, 2-band EQ and an auto-talkover function with depth control.
The PFL section is equipped with a CH-1/CH-2 balance control and a split option, which routes the channel signal to one side of the headphones and the main output signal to the other. A dual 10-segment LED level meter displays your choice of main or PFL signals. Our impressive QRS 3D surround effect is also on board, with ON/OFF button and depth control, as well as the automatic BPM counter with Tempo Difference and Time Offset displays. A continuously variable crossfader curve control plus a crossfader reverse switch with our revolutionary tap-and-hold mechanism give you plenty of power for mixing tricks. Last but not least, the VMX200 features a professional, VCA-level engine for utmost fader precision and reliability.
Features
- 2 dual-input stereo channels
- Gain and 3-band kill EQ (-32 dB) per stereo channel
- 1 microphone input with 2-band EQ plus auto-talkover function with depth control
- Awesome QRS 3D stereo surround effect
- Intelligent dual auto BPM counter with time and beat sync display
- Super-smooth Ultraglide faders with up to 500,000 lifecycles and full VCA control
- Reverse switch for crossfader
- Dedicated curve control for all faders
- PFL function with CH-1/CH-2 balance control and split option, assignable to level meter
Technical Description
- Mic Input: 40dB gain, servo balanced
- Phono Inputs 1 and 2: 40 dB gain @ 1kHz, unbalanced
- Line Inputs 1 and 2: 0dB gain, unbalanced
- Return: 0dB gain, unbalanced
- Main Out: Max. +21dBu @ +10 dBu (Line In)
- Tape Out: Typically 0 dBu
- Send: Typically 0dB
- Headphone Out: Typically 125mW @ 1% THD
- EQ: +/-8dBu
- Stereo Low: +12dB/-32dB @ 50 Hz
- Stereo Mid: +12dB/-32dB @ 1.2 kHz
- Stereo High: +12dB/-32dB @ 10 kHz
- Signal to Noise Ratio: >86dB (Line)
- Crosstalk: >77dB (Line)
- Distortion (THD): <0.06%
- Frequency Response: 20Hz-20kHz
- Input Gain Adjustment: -20dB-+9dB
- AC Voltage: 120V .60Hz fuse T 160mA H
- Dimensions: 3-1/2 x 8 x 11 in. (88 x 203 x 280mm), approximately
- Weight: 2.5 kg (5 lbs., 8 oz.), approximately
